The A-Series proprietary thin-film reverse osmosis membrane elements are characterized by high flux and high sodium chloride rejection. AK HR low pressure brackish elements are selected when high rejection and low operating pressures are desired. These elements allow significant energy savings since good rejection is achieved at operating pressures as low as 100 psig (689 kPa). These elements are recommended for low brackish water with salt concentration (TDS) levels up to 5,000mg/l. In turn, AK HR elements produce a permeate quality close to a standard brackish membrane element at a much lower pressure. SpecificationsModel AK 90LEType Brackish WaterAverage NaCl rejection percentage 99.50 %Minimum NaCl rejection percentage 99.00 %Average MgSO4l rejection percentage 0.00 %Max Pressure kPa 2757.91Max Pressure psi 400Max Temperature °C 48.6Max Temperature °F 122Membrane Active Area ft2 90Membrane Active Area m2 8.3Flow gpd 2300Flow m3/day 8.30Dimensions / WeightsLength in inch 40.00Length in cm 101.60Output Permeate in inch 0.750Output Permeate in cm 1.910Carton shipping weight in lbs 8.80Carton shipping weight in kg 4.00 SUEZ membranesSUEZ spiral wound membrane elements purify water for drinking water, boiler feedwater, seawater desalination, rinse water, and water reuse.These highly efficient membranes produce high-quality product water from virtually any source including surface water, tap water, well water or seawater.Benefits and Features reduce salinity and chemical oxygen demand (COD) remove chemical contaminants recover acid streams. clean-up hot condensates pre-concentrate streams prior to evaporator reduce energy requirements reduce wastewater volumes by increasing water reuse lower operating costs reduced equipment downtimeGE custom designs membrane elements to operate effectively in challenging environments,including extreme pHs, temperatures from 40° to 180° Fahrenheit (5° to 80° Celsius), oil contaminated streams and highly viscous solutions.Membrane Feed Water sea water brackish water tap (mains) water waste waterTypical Applications reverse osmosis potable water pure water process water food and beverage chemical processing metal finishing electronics
IsoPure Water
